Instructions on how to remove the cover

  1. Get ready to work: Before you start, make sure you have everything you need on hand. Prepare a beanbag and a clean space where you will work.
  2. Secure the : Do the activity preferably on a smooth surface, such as ceramic tiles or floor panels. Avoid carpets, rugs or floor rugs. If you can, work outdoors or in a room that is easy to clean up, in case polystyrene granules are spilled.
Instructions on how to remove the cover
  1. Open the slider: Open the outer zipper slowly, being careful not to damage the fabric. Pull out and unroll the inner cover so that it is laid freely.
Instructions on how to remove the cover
Instructions on how to remove the cover
Instructions on how to remove the cover
Instructions on how to remove the cover
  1. Sift the filling: Lift the product so that the polystyrene balls begin to spill into the attached cover. Try to perform this action slowly to avoid spilling the polystyrene balls.
Instructions on how to remove the cover
  1. Work carefully until all the filling is transferred. Make sure the beanbag is now empty and ready to detach the cover (individual amounts of pellets may remain inside the product).
Instructions on how to remove the cover
  1. Detach the cover: Now that the filling has been sifted, you can detach the cover from the product, being careful not to damage the material.
  2. Cleaning the cover: The cover is washable, throw it in the washing machine, following the washing instructions on the label (we recommend washing at 30 degrees) Remember, the cover must be closed! Make sure the zipper is closed
  3. Dry the cover: After washing the cover, make sure it is well-dried before reapplying the Styrofoam balls. Lay the cover out flat in a place where it can dry freely.
  4. Complete the filling: When the cover is completely dry, hook up the filling cover again with the zipper. Make sure the zipper is securely in place to avoid spilling granules.
  5. Lift the filling cover and slowly sift until all the polystyrene pellets are placed back into the beanbag.
  6. Close the slider: After filling the beanbag, carefully roll up the extra cover (do not unfasten) and place it inside the beanbag. Close the outer zipper.
  7. Check the quality: After closing the zipper, check that the cover has been correctly placed on the beanbag and the filling is evenly distributed. Also make sure the zipper is closed properly.
Instructions on how to remove the cover
Instructions on how to remove the cover

Enjoy your refurbished beanbag: Congratulations! You have just completed the process of pulling off the cover and re-filling the beanbag. Now you can enjoy a refurbished, clean and comfortable beanbag. Having this guide, taking off the cover and sifting the filling from the beanbag will be simpler and less stressful for you. Remember to always proceed with care and keep things tidy when doing this to avoid unnecessary messes.